The right machine.
For every challenge.
Choose the operation you need. Discover the differences between the five deburring and edge rounding solutions.
Slag removal
DM1100 CC
Slag removal and edge rounding after plasma or oxy-fuel cutting.
1100 × 50 mmOne side
Deburring + edge rounding
DM1100 ZC
Abrasive belt deburring followed by crossbelt edge rounding.
1100 × 120 mmOne side
Heavy burr removal + edge rounding
DM1100 DC
Contact drum and edge rounding for heavy plasma- or oxy-fuel-cut parts.
1100 × 120 mmOne side
Double-sided rounding
DM1100 Z2C
Top-side deburring and rounding of both sides in a single pass.
1100 × 120 mmBoth sides
SEE THE DIFFERENCES
Compare at a glance.
Starting criteria for selecting the process.
| Model | Main operation | Capacity* | Sides rounded / pass | Feed speed* | Details |
|---|---|---|---|---|---|
| DM1100 C | Edge rounding | 1100 × 50 mm | One side | 0,6–3,2 m/min | |
| DM1100 CC | Slag removal | 1100 × 50 mm | One side | 0,6–3,2 m/min | |
| DM1100 ZC | Deburring + edge rounding | 1100 × 120 mm | One side | 0,6–10 m/min | |
| DM1100 DC EVO | Heavy burr removal + edge rounding | 1100 × 120 mm | One side | 0,5–4 m/min | |
| DM1100 Z2C EVO | Double-sided rounding | 1100 × 120 mm | Both sides | 0,6–3,2 m/min |
* Width × thickness; nominal capacities from the manufacturer’s documentation. DC and Z2C data refer to EVO versions. Part compatibility and configuration are confirmed before quotation.